Body Armour Ballistic Protection
CCA Protect is an Australian owned company specialising in the research, design and manufacture of a wide range of Ballistic and Non-Ballistic products.
CCA Protect’s range of ballistic products include personal protection body armour (covert armour and overt armour), hard plates, aircraft armour upgrades, vehicle armour kits, marine armour upgrades and ballistic helmets.
CCA Protect houses Australia’s largest autoclave in its class, helmet presses, ballistics fabric cutter and a NATA Certified Ballistic Testing Facility. CCA Protect’s clients include the Australian Defence Force, New Zealand Defence Force, PNG Defence Force, Western Australian Police and Queensland Police.
CCA Protect’s ballistic protection meets NIJ Standards 0108.01 for ballistic panel and elements (at all threat levels) and 0101.03/04/06 for soft armour personal protection.
For more information on ballistic protection please visit the CCA Protect corporate website or contact CCA Protect on 07 5591 5316 email info@ccaprotect.com.au .
PLEASE NOTE: That, under Australian Law, ballistic body armour is NOT AVAILABLE TO THE GENERAL PUBLIC. It is classified as a Category E item under the Australian Firearms Act. Applications for a permit are available through your state Police department.
-
CCA200 Series Overt Vest
Call for PriceRead moreCCA Protect’s 200 series range of Body Armour has been designed to suit both Covert and Overt missions. CCA Protect’s CCA200 Series Ballistic Insert can be easily removed and placed into various mission specific outer covers. This Overt lightweight, high mobility style of Body Armour is extremely popular with our clients.
-
Aircraft Ballistic Protection
Call for PriceRead moreCCA Protect is a trusted manufacturer of ballistic protection by the Australian Defence Force. CCAProtect has developed a state of the art composite ballistic protection kit for a variety of aircraft including, CH47 Chinook helicopter, UH-1H Iroquois helicopter, C-130 Hercules, S-70A-9 and UH-60 Black Hawk helicopters. Our armour will defeat all known small arms threats up to and including the lethal 30-06 calibre APM2 (7.62 x 63mm AP) round *.Key Features:- Light weight
- Low profile
- Tested to NIJ Standard 0108.01
- Multi-strike ballistic resistance
- High durability
- High structural strength
- Resistant to environmental degradation effects
- Complies with FAR 25.853 (Flame resistant)
-
Vehicle Ballistic Protection
Call for PriceRead moreCCA Protect is a trusted manufacturer of ballistic protection by the Australian Defence Force. CCAProtect can develop state of the art composite ballistic protection kits for a variety of military vehicles. Our armour will defeat all known small arms threats up to and including the lethal 30-06 calibre APM2 (7.62 x 63mm AP) round *.Key Features:- Light weight
- Low profile
- Tested to NIJ Standard 0108.01
- Multi-strike ballistic resistance
- High durability
- High structural strength
- Resistant to environmental degradation effects
- Complies with FAR 25.853 (Flame resistant)
-
PASGT Helmet
Call for PriceRead moreThrough years of stringent research and development, CCA Protect has refined the traditional PASGT helmet to a point where it now offers lighter weight and higher protection levels.
These advances are made possible by CCA Protect’s use of the latest materials and moulding technologies. The new RBR PASGT helmet can also be used with various harness styles to provide the wearer with superior comfort and stability. It is available in a variety of colours.
- Available to suit Threat levels up to a V50 of 650m/s based on NATO STANAG 2920 for a 1.1 gram fragment.
- Multiple harness designs available.
- Popular choice of NATO Ground Forces and Police Tactical units
- Complete ear coverage
- Available in any colour upon request.
- Wide range of accessories
-
ECH Helmet
Call for PriceRead moreThe ECH helmet was designed to replace the PASGT helmet. It features NVG mount and ride rails not supported by the PASGT helmet.
Features:
- Light in weight
- Front mount for night vision attachment
- Side rails fro attachments
- Available in multiple sizes.
Also available as ACH upon request.
-
ECH Helmet Special Ops
Call for PriceRead moreThis is a variant of the ECH Helmet. It has raised sides to accomodate headsets and is lighter than the ECH.
The ECH helmet was designed to replace the PASGT helmet. It features NVG mount and ride rails not supported by the PASGT helmet.
Features:
- Light in weight
- Front mount for night vision attachment
- Side rails fro attachments
- Available in multiple sizes.
Also available as ACH upon request.
-
Soft Deployable Ballistic Blanket Shield
Call for PriceRead moreSoft ballistic blanket to be used as fast deployable shield.
- Up to Threat Level 3A
- Carry handles (both open and closed)
- Rollup for easy storage and convenient transportation
- Straps for attachment to awnings
- Available with Velcro strips to daisy-chain blankets
- Available in multiple colours
- Multiple sizes
- Aramid fibre
-
Ceramic Composite Body Armour Plate Insert
Call for PriceRead moreCCA Protect has been producing ceramic/composite insert plates for many years. Ceramic is still the preferred choice for defeating rifle ammunition including Armour-Piercing Projectiles. We use only the highest quality ceramics in our Hard Armour inserts.
With the appropriate combination of ceramic and composite materials, CCA Protect can produce inserts to defeat the majority of high velocity rifle small arms ammunition available today.
-
Submarine Ship Ballistic Protection
Call for PriceRead moreCCA Protect is a trusted manufacturer of ballistic protection by the Australian Defence Force. CCAProtect can develop state of the art composite ballistic protection kits for a variety of naval vessels. Our armour will defeat all known small arms threats up to and including the lethal 30-06 calibre APM2 (7.62 x 63mm AP) round *.Key Features:- Light weight
- Low profile
- Tested to NIJ Standard 0108.01
- Multi-strike ballistic resistance
- High durability
- High structural strength
- Resistant to environmental degradation effects
- Complies with FAR 25.853 (Flame resistant)
-
Overt Combat Body Armour (M8 Style)
Call for PriceRead moreOver Body Armour suitable for Ground Troops, Police Tactical Units and EOD Technicains and Media personnel who require maximum body coverage for the torse, shoulder and neck area.Available in a variety of threat levels to suit the customers specification from fragmentation ratings NIJII-A to III-A.Features:- High Collar
- Flexible Shoulder Coverage
- Fold down groin protector
- Optional Buckle or Hook and Loop closure at side
- Available in a vast range of colours and camouflage patterns
- An excellent choice for the wearer that requires maximum protection while maintaining a good level of mobility
-
CCA Takedown Shield
Call for PriceRead moreThe CCA Takedown Shield is used to protect from personal attacks or to overwhelm attackers. Often used in in medical and corrections industries
- 90cm x 60cm x 11cm
- 10 cm of firm foam padding
- Lightweight
- 10 heavy duty grab points
- Removable/washable cover
NOTE: This product does not provide ballistic protection. Other sizes are available upon request
